Safety Precautions
7
Warning for Use
WARNING
• Be sure to setup the appropriate air-moving system in case of using the device in a closed room or a room with
bad ventilation.
• The ink used for this device falls into the category of UN No.3082 and UN Class 9. Since the ink is flammable,
never use fire when using the device.
• When cleaning the ink station and head, be sure to wear the supplied goggle and gloves since you may get ink
or washing liquid in your eyes.
• If anyone drinks ink or washing liquid in mistake, get the person to vomit and see a doctor immediately.Do not
allow him or her drink vomit.Then, contact the Poison Control Center.
• If you absorb a lot of vapor and feel bad, immediately move to a location where fresh air is present and then
keep yourself warm and quiet.Then, consult a doctor as soon as possible.
• Discard the waste ink according to the local regulations of the area this unit is used.
Do not disassemble or remodel the device Handling of ink bottles
• Never disassemble or remodel the main unit of
the printer and the ink cartridge.Disassembling/
remodeling any of them will result in electric
shocks or breakdown of the device.
• Some of the ingredients (UV Curing initiator)
have toxic consequences to aquatic life.Avoid
leak into water system or sewage containing
water.
• Store ink bottles and waste ink tank in a place
that is out of the reach of children.
• If ink settles on the skin or clothes, immediately
wash it off with detergent or water.If you get ink
in your eyes, immediately wash your eyes with a
lot of clean water for at least 15 minutes. In this
case, also wash the backside of eyelids to rinse
ink away completely. Then, consult a doctor as
soon as possible.
Do not use the device in damp places
• Avoid damp environments when putting the
device into service. Do not splash water onto the
device.Highhumidity or water will give rise to fire,
electric shocks or breakdown of the device.
Abnormal event occurs
• If the device is used under an abnormal
condition where the device produces smoke or
unpleasant smell, fire or electric shocks can
result.Be sure to turn off the power switch
immediately and detach the plug from the
receptacle.Check first to be sure that the device
no longer produces smoke, and contact a
distributor in your district for repair.
• Never repair your device by yourself since it is
very dangerous for you to do so.
Grounding work
• This unit requires grounding work to prevent
electrical shock.
• Carry out the grounding work.
Wearing protective devices Handling of the power cable
• When cleaning the suction nozzle, which may
scatter ink, be sure to wear safety glasses and
gloves, or ink and washing liquid might enter
your eyes or ink and washing liquid put on your
hands might make your hands rough.
• Use a power cable attached to this unit.
• Take care not to damage, break or work on the
power cable.If a heavy matter is placed on the
power cable, heated or drawn, the power cable
can break to cause fire or electric shocks.
To Next Page
Loading...
