9
(4) Ink Discharge Passage (“Washing the Ink Discharge Passage” Chapter 4 of the Oper-
ation Manual)
Wash the ink discharge passage (DISWAY WASH) regularly(about once a week) to prevent the head nozzles
from clogging due to ink coagulation inside the passage.
1
Select “MAINTENANCE” menu “STATION” “DISWAY WASH”.
• Refer to the Step 1 to 3 of Chapter 4 “Washing the Ink Discharge Passage” of the user’s manual to
perform the operation.
• The carriage will move onto the platen.
2
Open the front cover.
3
Press [ENTER] key.
• Dry suction operation is performed repeatedly until the washing work is completed.
4
Fill up the cap with cleaning solution for
maintenance.
• Suck maintenance solution into a dropper and fill up
the cap with it. Fill up the cap with maintenance
solution on the verge of overflow from the cap.
5
Close the front cover and press the [ENTER] key.
9. Ink Maintenance (Once a week)
Refer to “Ink Maintenance” Chapter 4 of the Operation Manual.
Shake the ink periodically. If you do not shake the ink periodically, the print quality may deteriorate rapidly.
Shake about once a week.
Refer to Chapter 1 "Inserting Ink cartridges" in the operation manual for how to shake.
Please use our recommended ink cartridge.
• Before washing the ink discharge passage, make sure that the maintenance washing liquid is set. If
the maintenance washing liquid is not set, washing operation will not be conducted and the passage
could be clogged.
To Next Page
Loading...
