MIMAKI TS330-1600 - Page 54

Chapter 2 Printing
54
"Feed Correction"(P. 82)
Second band
First band
Good example Bad example
12.
Adjust the drop position for bi-directional printing.
"Correcting the Drop Position"(P. 84)
In this case, the drop position correction value will be "+4.0".
Media feed direction
13.
Preparing RIP data
"Preparing RIP data"(P. 86)
14.
Printing RIP data
"Printing"(P. 88)
15.
Cutting the media
"Cutting the media"(P. 91)