Chapter 2 Printing
62
Replacing Printed Roll Media
The take-up unit can be replaced easily by pulling it out toward you.
l
Pull out the take-up unit
Release the latch and detach the hook.
• There are latches on both sides of the take-up unit. Unlatch on both sides.
l
Secure the take-up unit
Slide in the take-up unit fully, then secure the hooks on the latches, and lock the lever.
• There are latches on both sides of the take-up unit. Secure the hooks on both sides to lock them
in place.
To Next Page
Loading...
