7
5
Clean the mist filter 1.(“Cleaning the mist
filter” Chapter 4 of the Operation Manual)
• If the stain is strong, please replace the filter referring to
the Operation Manual Chapter 4 “Replacing the mist filter”.
9. Periodically care
(for models with PR-200 ink only)
On models equipped with the PR-200, ink may clog the nozzle.
Please check the version on the label of the PR-200 ink cartridge, pack, or bottle, and clean the nozzle.
Please clean the nozzle twice a week for Ver.2 and once a month for Ver.3.
(1) Nozzle (“Nozzle Wash (When PR-200 ink using)” Chapter 4 of the Operation Manual)
1
Open the maintenance cover on the station
side.
Label Ver. notation position
220ml Cartridge 250ml Bottle
600ml Pack 1L Bottle
To Next Page
Loading...
