What to do if MIMAKI UJF-6042 MkII Printer does not start printing?
If your MIMAKI Printer isn't starting to print, it could be due to data not being transmitted properly. Try using the cable specifically designed for the device and ensure the interface cable is securely connected. Replacing the ink bottle with a new one may also resolve the issue.
Why does my MIMAKI UJF-6042 MkII power not turn on?
If your MIMAKI Printer's power doesn't turn on, the power cable might not be connected properly. Check that the power cable is securely connected. Also, ensure that the main switch is turned on, and the power button on the front of the machine is set to 'ON'.
Why is my MIMAKI Printer power not turning on?
If your MIMAKI Printer doesn't power on, the issue might stem from the power cable not being properly connected to the machine or computer. Ensure the power cable is securely connected. Also, verify that the main switch is turned on and that the power button on the front of the machine is in the 'ON' position.
Details the correct procedures for powering the machine on and off.
Explains how to set the media thickness and adjust the table height for printing.
Outlines the process for sending data from a computer and starting the printing operation.
Details settings for defining the origin position (X, Y, Z) for printing.
Describes settings for nozzle condition monitoring and recovery functions.
Provides guidelines for regular maintenance to ensure long-term machine performance.
Troubleshooting steps for issues related to the machine not powering on.
Troubleshooting steps when the machine fails to initiate printing.
Provides solutions for common image quality defects like lines, blur, or double printing.
Offers solutions for nozzle clogging issues that persist after head cleaning.
Lists common warning and error messages and their corresponding causes and solutions.
General| Print Technology | UV LED Inkjet |
|---|---|
| Resolution | 1200 x 1200 dpi |
| Interface | USB 2.0, Ethernet |
| Ink Colors | CMYK, White, Clear, Primer |
| Power Supply | AC 100-240V, 50/60Hz |
| Print Resolution | 1200 x 1200 dpi |
| Maximum Print Size | 610 mm x 420 mm |
| Ink Type | UV Curable Ink |
| Media Thickness | Up to 153 mm |
To Next Page
