Why does my MIMAKI UJF-3042 MkII Printer power not turn on?
If your MIMAKI Printer's power doesn't turn on, the power cable might not be connected properly. Check that the power cable is securely connected. Also, ensure that the main switch is turned on, and the power button on the front of the machine is set to 'ON'.
General| Maximum Print Size | 300 x 420 mm |
|---|---|
| Power Supply | AC100-240V, 50/60Hz |
| Print Technology | UV LED |
| Ink Type | UV curable ink |
| Interface | USB 2.0, Ethernet |
| Ink Colors | C, M, Y, K, W, Cl |
| Media Weight | Up to 5 kg |
| Resolution | Up to 1200 x 1200 dpi |
Procedures for installing and positioning the machine, including space requirements.
Identifies and describes the main components of the machine's front, rear, and carriage.
Explains the meaning of the machine's status indicator light colors and patterns.
Details the operation panel keys, display, and status indicators for machine control.
Instructions for connecting USB, LAN, and power cables to the machine.
Covers ink types, handling precautions, expiration, and bottle status indicators.
Explains the Local, Menu, and Remote operating modes for machine control.
Outlines the primary sequence of operations for using the machine.
Step-by-step guide for safely turning the machine's power on and off.
Procedures for setting media thickness and adjusting the table height for printing.
Instructions on how to perform test prints to check nozzle condition and print quality.
Details on performing head cleaning based on test print results to resolve print issues.
Steps to start printing an image from computer data, including media setup and data transmission.
Configuration options for head height, media thickness, and gap settings.
Settings for defining print origin X, Y, and Z offsets for accurate positioning.
Overview of various setup parameters for machine operation and print conditions.
Procedures for correcting media feeding rate and print alignment for improved accuracy.
Configuration for ink layers, head refresh intervals, and UV lamp modes.
Settings related to power, time, network, event mail, and language.
Configuration for network settings and enabling email notifications for machine events.
Options for remote operation, changing display language, and configuring the ionizer.
Settings for nozzle check operations, recovery, and judgment conditions.
Accessing and displaying machine usage, version, and error history information.
Daily care and basic maintenance tasks to keep the machine in good working order.
Lists and describes the various maintenance functions available through the machine's menu.
Instructions for cleaning and maintaining the ink cap and wiper for optimal performance.
Steps for cleaning or replacing the mist filter to ensure proper ventilation.
Performing nozzle washing with cleaning liquid to address nozzle clogging or bent nozzles.
Regular cleaning of the ink discharge passage to prevent nozzle clogging.
Careful cleaning of the ink head area to remove ink and dust without damaging components.
Configuring the nozzle recovery function to use alternative nozzles when some are faulty.
Setting up automatic maintenance tasks like refresh intervals and cleaning cycles.
Instructions for replacing consumable parts like wipers, absorbers, and nozzle caps.
Steps for replacing the mist filter box if it is damaged or dirty.
Procedure for replacing the LED glass when it becomes dirty or ink hardens on it.
Instructions for safely discarding waste ink from the tank when prompted.
Guide on refilling the cooling system with antifreeze mixed liquid.
Initial steps for diagnosing and resolving common machine issues like power or printing problems.
Lists common warning and error messages, their causes, and recommended solutions.
Detailed table of error codes, their causes, and specific troubleshooting steps.
Technical details on print resolution, speed, media size, power, and dimensions.
Information on ink types, colors, capacity, shelf life, and storage conditions.
Diagrams and tables showing the correct order for installing ink bottles based on the ink set used.
A form to fill out with machine and issue details when contacting technical support.
Details of open source software licenses used in the printer firmware.
To Next Page
