Need help?Do you have a question about the MIMAKI UCJV300-75 and is the answer not in the manual?
General| Maximum Print Width | 75 inches |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB 2.0, Ethernet |
| Print Technology | UV LED |
| Ink Type | UV Ink |
| Number of Colors | 6 colors |
| RIP Software | RasterLink6 |
| Power Requirements | 100-240V, 50/60Hz |
| Operating Environment | Temperature: 20 - 30°C (68 - 86°F), Humidity: 35 - 65% RH (Non-condensing) |
Identification and description of the machine's components and their functions.
Information on ink types, precautions for use, and installation of ink bottles.
Overview of the steps required for a standard printing operation.
Instructions for turning the machine's power on and off correctly.
Procedure for setting media, including head height and pinch roller adjustments.
Guidance on performing test prints to check for nozzle issues.
Methods for cleaning the print head based on test print results.
Procedures for setting up and executing cutting tasks.
Creating and cutting data using register marks.
Configuration for detecting register marks.
Important safety and handling advice during machine maintenance.
Common issues like power, printing start, and media problems.
Corrective actions for poor image quality phenomena.
Guidance on interpreting and resolving warning/error messages.
Troubleshooting steps for ink-related errors.
To Next Page