Operation panel
This panel has the operation keys
required for operating the machine and
the LCDs for displaying setting items,
etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold or
release the media.
Waste ink tank
Waste ink gathers in this tank.
Stand
Supports the main body of the machine. It is
provided with casters that are used to move
this machine.
After cover
The printed media is output
along the after cover.
Ink supply unit
The ink bottles are inserted here. ( P.1-12)
Take-up device
Automatically winds up the printed roll media.
Carriage
The print head moves from side to side.
Maintenance cover
Open these covers only when you have to perform
maintenance. Normally, keep all covers closed even
when the power switch is off,
Platen
Area where media is flattened
and printed.
To Next Page
Loading...
