AC inlet
Connect the power cable to the AC inlet.
Clamp lever (rear)
Interlocks with the clamp lever in
the font of this machine.
USB connector
This is a USB 2.0 interface connector.
Main power switch (INLET 1)
Turns on/off the main power for this machine. Leave
the main power turned on to prevent ink clogging.
Vent filter box
Vents the ink mist
generated during printing.
Roll holder
Grabs the roll media by the ends of
its paper core to hold the media in
place. It supports 2-inch and 3-inch
paper cores.
LAN connector
Use this connector when you use network functions.
To Next Page
Loading...
