1-18
Chapter 1 Before Use
Menu Mode
This machine has four modes. Each menu mode is described below.
NOT-READY mode
The machine is in this mode before the detection of the media.
LOCAL mode
In this mode, the machine is getting ready for printing.
All the keys are effective.
Although the machine can receive data from the computer, it does not perform printing yet.
During LOCAL mode, you can perform the following operations:
• Press the JOG keys to set a print origin and a print width.
• You can check the remaining ink levels, cartridge error details, model name, firmware version, and so on
by pressing the [Enter] key.
MENU mode
The MENU mode is activated if you press the [FUNC1] button during LOCAL mode. During MENU mode, you can set
various functions.
REMOTE mode
In this mode, the machine prints the received data.
width:1340mm
REMOTEMENU
PRE PRINT
TEST PRINT
CLEANING
LO CA L
Screen display during LOCAL mode
The detected media width is
displayed.
The detected ink levels
(approximate) are displayed.
Function buttons
The functions assigned to
[FUNC1], [FUNC2], and
[FUNC3] are displayed.
[SEL] key [FUNC1], [FUNC2], and [FUNC3]
You can change functions by pressing the [SEL] button.
To Next Page
Loading...
