MIMAKI UCJV300-75 - Setting of LT Mode

3-11
3
2
2
2
Chapter3 Setup
5
Press the key several times
to end.
Setting of LT mode
1
Press the
(MENU)
key in
LOCAL.
2
Press to select "Setting" and
press the key.
3
Press
(>>)
.
4
Press to select "LT mode", and
press the key.
5
Press to select set value, and
press the key.
• Set Value: ON / OFF
6
Press the key several times
to end.
• Since UV light intensity adjustment is performed,
check the print performance (stickiness, odor etc.)
before using the LT mode.
• Effective condition
Ink type Ink set Resolution Pass Media
LUS170
4C
300×900 6 pass
PVC
Tarp a u l i n
600×600 8 pass
PVC
Tarp a u l i n
6C
300×900 12 pass
PVC
Tarp a u l i n
600×600 16 pass
PVC
Tarp a u l i n