How to clear clogged nozzles on my MIMAKI UCJV300-107?
To clear clogged nozzles, you can try the following: * Perform head cleaning. * Perform print head nozzle washing. * Perform [MENU] > [Maintenance] > [INK FILL].
What to do if the light-blocking cover comes off my MIMAKI UCJV300-107 Printer?
If the light-blocking cover comes loose, reattach it by following these steps: 1. Insert the lug on one side of the light-blocking cover into the corresponding hole in the tank. 2. Insert the lug on the other side while pushing in toward the first hole.
Why does the media jam or get dirty in my MIMAKI UCJV300-107 Printer?
To address media jams or dirty media, consider the following: * Ensure you are using the recommended media. * Avoid using curled media or media with folded ends. * Use the take-up unit to adjust or reload the media.
How to fix image defects occurring on my MIMAKI UCJV300-107 Printer?
To address image defects, try the following: * Remove any paper scraps or debris from areas the head passes over, such as media holders. * Perform head cleaning. * Perform feed correction. * Clean the wiper. * Clean the cap rubber. * Clean the carriage underside.
How to correct misaligned print and cut positions on my MIMAKI UCJV300-107 Printer?
If the print and cut positions are misaligned, use the MIMAKI RIP software (RasterLink) to print a correction pattern. Then, check the pattern and manually input correction values.
Why does the cut position shift on my MIMAKI UCJV300-107?
If the cut position shifts, it may indicate a problem with the register mark sensor. Perform the operation used to check the responsiveness of the register mark sensor. Note that you cannot check the responsiveness manually.
How to troubleshoot a MIMAKI Printer when the power does not turn on?
To resolve the issue of the power not turning on, ensure the power plug is securely inserted into the power outlet, use the power cable provided, and turn on the main power.
What to do if the MIMAKI UCJV300-107 power does not turn on?
If the MIMAKI Printer does not turn on, ensure the power plug is securely connected to the power outlet. Also, make sure you are using the power cable provided with the printer and that the main power is turned on.
How to fix image defects on MIMAKI UCJV300-107 Printer?
To fix image defects on your MIMAKI Printer, remove any paper scraps or debris from areas where the head passes, such as media holders. You may also need to perform head cleaning, feed correction, wiper cleaning, cap cleaning, and carriage underside cleaning. Additionally, consider performing an ink fill, replacing the wiper, or registering nozzle recovery.
What to do if the ink has leaked from my MIMAKI Printer?
General| Connectivity | USB 2.0, Ethernet |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Ink Type | UV curable ink |
| Ink Colors | Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta |
| Media Type | Roll media |
| Maximum Media Weight | 110 lbs |
| Ink Types | LUS-170 |
Details precautions for abnormal conditions, power supply, and skin contact.
Identifies and describes the main components of the printer.
Guides on connecting the power cable and turning the machine on.
Explains connecting a PC via USB or LAN.
Outlines the steps for system configuration and software setup.
Details the procedure for replacing ink bottles and handling ink IC chips.
Provides a step-by-step guide to the printing workflow.
Covers adjusting the print head height to suit media thickness.
Guides on performing test prints to confirm ink quality.
Details various methods for cleaning the print head.
Outlines the steps involved in using the cutting function.
Guides on installing cutters and pens, and adjusting blade protrusion.
Outlines the workflow for cutting using register marks.
Provides essential precautions before performing any maintenance tasks.
Lists routine maintenance tasks and their recommended timing.
Addresses common issues like power, printing, and media jams.
Lists error messages, their causes, and corrective actions.
To Next Page