Chapter 4 Try cutting data with registration marks
105
4.5 ID Cut Process
1.
Create data with ID Cut.
• For more information, refer to the ID Cut Guide.
https://mimaki.com/download/software.html
2.
Print printing data with ID Cut.
"Print Process"(P. 50)
3.
Prepare for cutting.
"Cutting Process"(P. 80) (Steps 4 to 8)
4.
Register the information for the printed register marks.
"Setting Mark Detection Conditions"(P. 103)
5.
Detect the register mark origin.
"Detecting the Position of the Register Mark Origin"(P. 104)
6.
Cut the data.
"Cutting the Cutting Data"(P. 92)
7.
Cut the media.
"Cutting the Media"(P. 78)
4
To Next Page
Loading...
