MIMAKI UCJV300-107 - Pinch Roller Replacement; Media Holder Replacement

Chapter 6 Maintenance
151
6
Press the [ENTER] key once replacement is completed.
7
Close the maintenance covers, then press the [ENTER] key.
Pinch Roller Replacement
Replace worn or dirty pinch rollers with new ones.
• The pinch rollers are small. Be careful to avoid dropping them into the product interior.
1
Open the front cover.
2
Raise the clamp lever.
3
Remove the O-ring retaining the pinch rollers.
O-ring
Pinch roller
4
Remove the pinch roller spindle.
Pinch roller spindle
5
Attach new pinch rollers, and secure them using the O-ring.
6
Close the front cover.
Media Holder Replacement
If the media holder becomes deformed and touches the carriage or print head, replace with a new media
holder.
6