Need help?Do you have a question about the MIMAKI UJF-6042 and is the answer not in the manual?
Highlights significant reduction in power consumption (93%) and CO2 emissions (94%).
LED UV lamp operates at room temperature, preventing media deformation and allowing heat-sensitive substrates.
Enables direct printing on substrates up to 610mm width and 150mm thickness for versatile media handling.
Achieves rich gradations and fine detail with 3 dot sizes, including a minimum of 4pl.
Ball screw type mechanism enhances ink drop placement accuracy by 50% over conventional models.
Details adhesion performance of inks on various substrates, with and without primer.
Evaluates ink fastness against common solvents like Ethanol, Isopropyl Alcohol, and Xylene.
Highlights significant reduction in power consumption (93%) and CO2 emissions (94%).
LED UV lamp operates at room temperature, preventing media deformation and allowing heat-sensitive substrates.
Enables direct printing on substrates up to 610mm width and 150mm thickness for versatile media handling.
Achieves rich gradations and fine detail with 3 dot sizes, including a minimum of 4pl.
Ball screw type mechanism enhances ink drop placement accuracy by 50% over conventional models.
Details adhesion performance of inks on various substrates, with and without primer.
Evaluates ink fastness against common solvents like Ethanol, Isopropyl Alcohol, and Xylene.
General| Print Technology | UV LED Inkjet |
|---|---|
| Maximum Media Thickness | 150mm |
| Ink Type | UV-curable ink |
| Print Head | On-demand piezo head |
| Maximum Print Size | 610mm x 420mm |
| Resolution | 1200 x 1200 dpi |
| Number of Ink Colors | 6 colors (CMYK, White, Clear) |
| Interface | USB 2.0, Ethernet |
| Power Supply | AC 100-240 V ±10%, 50/60 Hz |
| Maximum Media Weight | 8 kg |
| Ink Capacity | 220 ml / cartridge |
| Operating Environment | Temperature: 20-30°C, Humidity: 35-65% RH |
To Next Page