MIMAKI UJF-6042 - Media Compatibility (Adhesiveness); Solvent Fastness (Rubbing Test)

LED UV INK
■ Media Compatibility (Adhesiveness)
■ Solvent Fastness (Rubbing Test)
14
Substrate
LH-100 LF-140
LF-200
*¹
With IJ Primer With IJ Primer
Polycarbonate ○
*²
○
*²
○
ABS ○
*²
○
*²
○
Coated PET
(Enhancing ink adhesion)
○
*²
○
*²
○
PET (No coating)
○ ○
Rigid PVC ○
*²
○
*²
○
Acrylic
○ ○ ○
Glass
○ ○
SUS ○
Aluminum ○ ○
Brass △ △
Copper ○ ○
Epoxy ○ △
Nylon ○ △
PP
PE
*¹LF-200 can not be used with IJ primer.
*²Depending on printing media, adhesion would be reduced by using IJ primer.
Please apply the primer on media which has high ink adhesiveness before starting production.
LH‐100 LF‐140 LF‐200
Ethanol*1
○
(Solutionconcentration100%)
△
(Solutionconcentration60%
*1
△
（
Solutionconcentration
40%
）
*1
IsopropylAlcohol
○ ○
Xylene
○ ○
Note: The results above have been achieved by Mimaki and are not guaranteed. Please carry out a test beforehand.
*1: Solution concentration that made a rubbing mark on a printedsurface