■
The reduction of power consumption and CO2 emission
・The reduction of the total cost by cutting down on power use
■
The reduction of the heat impact
・The temperature of the metal halide lamp reaches 70℃, causing media deformation. However,
since the temperature of the LED UV lamp is the ordinary temperature, the heat-sensitive
substrate which has been difficult to print on is now available.
・The avoidance of the special ventilation installation cost.
■
The improvement of production circumstances.
・The long-life LED UV lamp (approx. 10,000 hours), which does not require maintenances often,
permits the increase in productivity.
Note: The life-time of the metal halide lamp is about 1,000 hours.
4
Eco-Friendly
【 Power consumption 】 【 CO2 Emission 】
Supported the environmentally-conscious LED-UV curing unit
* The data above is the comparison with Mimaki’s conventional printers. The figures may differ depending on the machine compared.
93%
Reduction
【kWh】
94%
Reduction
To Next Page
Loading...
