MIMAKI UCJV300-75 - Setting of a LANGUAGE; Setting of Time; Setting of Unit (Temperature; Length); Setting of a KEY BUZZER

3-16
Chapter 3 Machine Setting
Setting of a LANGUAGE
You can change the displayed language.
1
In LOCAL mode, press
(MENU)
(twice
).
• The MACHINE SETUP MENU appears.
2
Press to select "LANGUAGE",
and press the key.
3
Press to select a language, and
press the key.
4
Press the key several times to
end the setting.
Setting of Time
You can set time of your country (time difference).
1
In LOCAL mode, press
(MENU)
(twice
).
• The MACHINE SETUP MENU appears.
2
Press
(>>)
.
3
Press to select "TIME", and press
the key.
4
Press to enter time, and
press the key.
• Year/Month/Day/Time selecting: by the [][]
keys
• Year/Month/Day/Time inputting: by the [][]
keys
5
Press the key several times to
end the setting.
Setting of Unit (Temperature/ Length)
Units used by this machine are set.
1
In LOCAL mode, press
(MENU)
(twice
) .
• The MACHINE SETUP MENU appears.
2
Press
(>>)
.
3
Press to select "UNIT/TEMP." or
"UNIT/LENGTH", and press the
key.
4
Press to select a setting, and
press the key.
• Temperature setting: °C/°F
• Length setting: mm/inch
5
Press the key several times to
end the setting.
Setting of a KEY BUZZER
You can turn off the buzzer sound when pressing the key.
1
In LOCAL mode, press
(MENU)
(twice
) .
• The MACHINE SETUP MENU appears.
2
Press
(>>)
once.
3
Press to select "KEEP BUZZER",
and press the key.
4
Press to select a setting, and
press the key.
• Set Value: ON/ OFF
5
Press the key several times to
end the setting.
• -20 hours to +4 hours can be set.
• Some of the length information displayed for cut-
ting-related functions is always shown in units of
mm, regardless of the setting you specify here.
• When the key buzzer is set to "OFF", the buzzer
sound for errors, warnings, operation completion,
etc. cannot be shut off.