MIMAKI UCJV300-75 - Workflow of Cutting

2-22
Chapter 2 Basic Operation
Workflow of cutting
Turning the Power On/Off
See "Turning the Power On/Off" ( P.2-3).
Setting Media
See "Setting Media" ( P.2-4).
Installing Tools
See "Installing Tools" ( P.2-23).
Setting the Cutting Conditions
See "Setting the Cutting Conditions" ( P.2-
26).
Test Cutting
See "Test Cutting" ( P.2-28).
Cutting Data
See "Cutting Data" ( P.2-29).