MIMAKI UCJV300-75 - About MAINTENANCE MENU

5-4
Chapter 5 Maintenance
About MAINTENANCE MENU
This provides various settings for doing maintenance on the machine.
The following items can be set in Maintenance settings.
TESTPRINT
>
> CLEANING
>
STATIONMAINTENANCE
MAINTENANCE
STATION
>
> NOZZLERECOVERY
>
AUTOMAINTENANCE
>
INKFILLING
>
INKTANKEXCHANGE
>><<
<<
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
LOCAL
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
LOCAL
MAINTENANCE
OVERFLOWMAINTENANCE
>
AIRPURGE
>
>><<
MENU
SETUP
>
> MAINTENANCE
>
MACHINESETUP
NOZZLECHECK
>
>
INFORMATION
>><<
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
LOCAL
 MAINTENANCE MENUs at-a-glance
 Screen transition when key is pressed
Press this to confirm a
setting, etc.
Press this to select
MAINTENANCE MENU, or
to switch to the previous
screen.
Press this to use the
maintenance function.
Use these to select a
setting item.
Press this to use the
maintenance function.