MIMAKI UCJV300-75 - Chapter 7 Appendix; Specification; Printer Section Specifications

Chapter 7 Appendix
7-2
Specification
Printer Section Specifications
UCJV300 Series
UCJV150 Series
Item UCJV300-160 UCJV300-130 UCJV300-107 UCJV300-75
Print head
Method Drop-on-demand piezoelectric print heads
Specification 2 heads, 8 nozzles: 4c/6c+WW (in-line)
Printing mode (scan x feed) 300x600dpi
*1
/ 300x900dpi / 600x600dpi / 600x1200dpi / 1200x1200dpi
*1. Depending on the ink type, it may not be installed.
Plotting resolution
x-dpi: 600, 900, 1200
y-dpi: 300, 600, 1200
Usable inks
UV curing ink (genuine Mimaki ink)
C, M, Y, K, Lc, Lm, W, CL
Ink supply Supplied from bottles (UV curing ink)
Ink capacity 1L (1 bottle for each color)
Usable media
Label stock (paper-based) / PVC sheet (including laminated; thickness no more than
0.25 mm) / Fluorescent sheet / Reflective sheet
Margin
Leaf media
Left end and right end : 15 mm (Default) / Min. 5 mm Front : 120 mm Rear : 150 mm
(Left end and right end : 0.6 in (Default) / Min. 0.2 in Front : 4.7 in Rear : 5.9 in)
Roll media
Left end and right end : 15 mm (Default) / Min. 5 mm Front : 120 mm Rear : 150 mm
(Left end and right end : 0.6 in (Default) / Min. 0.2 in Front : 4.7 in Rear : 5.9 in)
Head height adjustment Manual 3-stage (2.0/2.5/3.0)
Waste ink tank Bottle type (2,000 cc)
Command MRL- V
UV unit Two air-cooled LED UV irradiation units (mounted on the head slider)
Item UCJV150-160
Print head
Method Drop-on-demand piezoelectric print heads
Specification 1 heads, 4 nozzles: 4c
Printing mode (scan x feed) 300x600dpi
*1
/ 300x900dpi / 600x600dpi / 600x1200dpi / 1200x1200dpi
*1. Depending on the ink type, it may not be installed.
Plotting resolution
x-dpi: 600, 900, 1200
y-dpi: 300, 600, 1200
Usable inks
UV curing ink (genuine Mimaki ink)
C, M, Y, K
Ink supply Supplied from bottles (UV curing ink)
Ink capacity 1L (1 bottle for each color)
Usable media
Label stock (paper-based) / PVC sheet (including laminated; thickness no more than
0.25 mm) / Fluorescent sheet / Reflective sheet
Margin
Leaf media
Left end and right end : 15 mm (Default) / Min. 5 mm Front : 120 mm Rear : 150 mm
(Left end and right end : 0.6 in (Default) / Min. 0.2 in Front : 4.7 in Rear : 5.9 in)
Roll media
Left end and right end : 15 mm (Default) / Min. 5 mm Front : 120 mm Rear : 150 mm
(Left end and right end : 0.6 in (Default) / Min. 0.2 in Front : 4.7 in Rear : 5.9 in)
Head height adjustment Manual 3-stage (2.0/2.5/3.0)
Waste ink tank Bottle type (2,000 cc)
Command MRL- V
UV unit Two air-cooled LED UV irradiation units (mounted on the head slider)