3-13
3
2
2
2
Chapter 3 Machine Setting
MACHINE SETUP MENUs table
Function name Set value Default Meaning
AUTO Power-off ( P.3-14) NONE/10 to 600 min 30min
When no operation has been performed for the set
time, the power supply is automatically turned "OFF".
TAKE-UP UNIT
(P.3-14)
TAKE-UP UNIT ON/ OFF ON
For setting whether the take-up unit is used or not
used.
TAKE-UP SW Continuance/ Temporary
Continua
nce
Set the operation method when press the ON / OFF
button on the take-up unit.
MEDIA REMAIN ( P.3-15) ON/ OFF OFF You can control the remaining amount of media.
MEDIA DETECT
(P.3-15)
DETECTION
TYPE
AUTO/MANUAL AUTO Set the media detection method.
USE PR
NUMBER
QUERY
ON / OFF ON
Set whether or not to enter the number of the pinch
rollers you are using during media detection.
LANGUAGE( P.3-16)
English /Japanese/Chinese/
Turkish
English Displayed language is changed.
TIME ( P.3-16) +4 h to -20 h
Japan
time
Time difference is corrected.
UNIT/ TEMP. ( P.3-16) C (Celsius)/F (Fahrenheit) C A unit for displaying temperature is set.
UNIT/ LENGTH ( P.3-16) mm / inch mm A unit for displaying length and area is set.
KEY BUZZER ( P.3-16) ON / OFF ON A buzzer sound when keys are pressed is set.
CONFIRM. FEED ( P.3-17) ON / OFF ON
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
SPACE FEED MODE ( P.3-17)
INTERMITTENT /
CONTINUOUS
INTERMI
TTENT
Change the feed mode of the margin included in the
image data.
NETWORK
(P.3-17)
Set the network.
Check IP Addr. The IP address currently used by this machine is displayed.
Check MAC
Addr.
The IP address currently used by this machine is displayed.
DHCP ON/ OFF
When it is ON, the IP address given by the DHCP
server is used.
AutoIP ON/ OFF
When it is ON, the IP address is determined by the
AutoIP protocol. However, DHCP is ON, DHCP has
priority.
IP Address
*1
Set the IP address used by this machine.
Default
Gateway
*1
Set the default gateway used by this machine.
DNS
Address
*1
Set the DNS server address used by this machine.
SubNet
Mask
*1
Set the digit number of the subnet mask used by this machine.
EVENT MAIL
Mail Delivery
(P.3-18)
ON / OFF OFF
Set whether you send/ do not send the e-mail when
the set event occurs.
Select
Event
(P.3-18)
Print Start
Event
ON / OFF OFF
Set whether you send/ do not send the e-mail at the
start of printing.
Print End
Event
ON / OFF OFF
Set whether you send/ do not send the e-mail at the
end of printing.
Plot Start
Event
ON / OFF OFF
Select whether an e-mail is sent or not when cutting
starts.
Plot End
Event
ON / OFF OFF
Select whether an e-mail is sent or not when cutting
ends.
Error Event ON / OFF OFF
Set whether you send/do not send the e-mail when
an error occurs.
Warning
Event
ON / OFF OFF
Set whether you send/do not send the e-mail when
a warning occurs.
Other Event ON / OFF OFF
Set whether you send/ do not send the e-mail when
an event other than the above occurs.
Mail Address
(P.3-19)
Set the e-mail address to
which you send the event
mail.
Alphanumeric characters and symbols (within 96 characters)
To Next Page
Loading...
