2-21
2
2
2
2
2
Chapter 2 Basic Operation
Pause printing
Perform the following operation when pausing printing.
1
Press
(LOCAL)
during printing.
• Pause the printing operation
• Interrupt data sending at the PC side during the
data is sent from the PC.
• Press the [REMOTE] key to resume printing.
Cancel printing (Data Clear)
If you want to cancel printing the received data, select
DATA CLEAR.
1
In LOCAL mode, press the key,
Press
(DATA CLEAR)
.
2
Press the key.
• The received data is erased then it returns to the
Local.
Cutting Media
By using the keys on the operation panel, you can cut the
media at any position.
1
In LOCAL mode, press .
• It enters into the origin setting mode.
• By pressing [], feed the media to the cutting
position.
2
Press the key.
• The media is cut.
• When the cutting has been completed, the current
mode returns to LOCAL.
• Do not perform data clear during data transmis-
sion.
• Received data is stored in the receiving buffer
even after data clear.
To Next Page
Loading...
