MIMAKI UCJV300-75 - Setting of the Printing Check; Setting of the NOZZLE RECOVERY; Setting of the Judgment Condition

3-25
1
2
3
4
5
6
Chapter 3 NOZZLE CHECK
Setting of the Printing Check
Select ON when you want to conduct nozzle check at the
start of online printing.
1
In LOCAL mode, press
(MENU)
(three times)
.
• The NOZZLE CHECK MENU appears.
2
Select "Printing Check", and then press
the key.
3
Press to select ON, and press the
key.
• The "Check Interval" setting screen will be
displayed.
• Select "OFF" to not set nozzle check. Proceed to
the Step 11.
4
Press the key.
5
Press to select a setting item,
and press the key.
• Select the nozzle check interval from "LENGTH"
or "FILE".
LENGTH: Nozzle check is conducted when the
printed length reaches the set length.
FILE: Nozzle check is conducted when the
number of printed files reaches the set
number.
6
Press to select a setting, and
press the key.
• The set value will differ according to the setting
selected in Step 5.
LENGTH: 0.1 to 30.0 m
FILE: 1 to 100 files
7
Press the key twice.
• The "Action" setting screen appears.
8
Press and then press the
key.
• "CLEANING TYPE" will be selected.
9
Press to select a cleaning time,
and press the key.
Setting value: OFF/SOFT/ NORMAL/ HARD
10
Press to select a retry count, and
press the key.
Setting value: 0 to 3
11
When you are finished setting "Printing
Check", press the key several
times.
Setting of the NOZZLE RECOVERY
Set this if you want to conduct automatic nozzle recovery
when nozzle missing is detected.
1
In LOCAL mode, press
(MENU)
(three times)
.
• The NOZZLE CHECK MENU appears.
2
Press to select "NOZZLE
RECOVERY", and press the key.
3
Press to select ON/OFF, and
press the key.
4
When you are finished setting "NOZZLE
RECOVERY", press the key
several times.
Setting of the Judgment Condition
Set the conditions for judging nozzle missing.
1
In LOCAL mode, press
(MENU)
(three times)
.
• The NOZZLE CHECK MENU appears.
2
Press to select "Judgment
Condition", and press the key.
3
Press the key to select a color.
4
Press to set the number of
nozzles for judgment, and press the
key.
5
When you are finished setting "Judgment
Condition", press the key
several times.
• The type of color changes depending on
the ink set.