2-17
2
2
2
2
2
Chapter 2 Basic Operation
Test Printing
Print a test pattern to check that there are no discharging
defects such as nozzle clogging (slight touching of ink or
nozzle missing).
Relationship between head row and test
pattern
The relations between head row and test pattern print
position are as follow.
About test patterns
This machine provides you two test patterns.
Normal test pattern (when using ink other than
white ink)
When you use ink that you can check by printing a test
pattern on a white media, print this test pattern.
Test pattern for checking white ink
When you use a white media and wish to check
discharging status of white ink, print this test pattern.
Note on test printing
Test Printing
Print a test pattern to check that there are no discharging
defects such as nozzle clogging (slight touching of ink or
nozzle missing).
In addition, you can select the orientation of the test
pattern to print from two types in order to perform test
printing repeatedly. Select one depending on your use.
• When using leaf media, set a media of more than
A3 size put horizontally. If a media with narrow
width is set, printing will only be conducted to mid-
way.
• When using a roll media, rewind the media by
hand before printing so that it is not loose. When
the roll media has not been rewound tightly, it may
cause image quality to deteriorate.
Media feed direction
Test pattern
Head
Check before test printing.
• If media has been set P.2-4
• If the origin position has been set
• If the head gap has been adjusted P.2-4
Media-feeding direction
: When the set value is "FEED DIR."
: When the set value is "SCAN DIR."
To Next Page
Loading...
