MIMAKI UCJV300-75 - Operation Panel

1-6
Chapter 1 Before Use
Operation Panel
Use the operation panel to specify print settings or to operate this machine.
*1: Ink status
The display shows icons indicating the status (remaining ink, error, etc.) of ink bottles.
The following table describes each icon:
Icon Meaning
The ink bottle icons are arranged in the same order as the actual ink bottles are arranged in the ink supply unit. For
each ink bottle icon, the remaining ink is indicated in nine levels.
The following icons are arranged in descending order of remaining ink level:
This icon is displayed at ink end or ink near end.
Be aware that the ink is running low.
Indicates that the cartridge cannot be used due to ink end or ink error (remaining ink 0, cartridge not attached, etc.).
Indicates that ink has expired or that one month has passed since the expiration date. Please replace the ink bottle
as soon as possible. After two months from the expiration date, the ink bottle can no longer be used.
width:1340mm
REMOTEMENU
TEST PRINT
CLEANING
LOCAL
Status indicator lamp
Indicates the machine's status (printing, an error has occurred, etc).
Lamp state Machine state
Off
The machine is in LOCAL mode, which means that there is no
incoming print data or error occurring on the machine.
Solid light blue The machine is in REMOTE mode.
Blinking light
blue
The machine is currently printing data.
The machine is performing a test print or other similar
operation (that is, the machine is printing the patterns stored in
it).
Solid blue There is remaining print data in the machine.
Blinking red An error has occurred.
Solid red An error (SYSTEM HALT) has occurred.
Display
The display shows the following
information:
• Status of the machine
• Width of the set media
•Ink status
*1
• Functions assigned to [FUNC1],
[FUNC2] and [FUNC3]
*2
button
Press this button to select a function to
be assigned to each function button
([FUNC1], [FUNC2] and [FUNC3]).
//
buttons
Press one of these buttons to set a
function or to perform test printing. With
each pressing of the [SEL] button, you
can change the function assigned to the
selected function button.
JOG button
Use these buttons to move the head or
media during LOCAL mode or to select
a setting.
button
Use this button to cancel the entered
setting or to go back to the previous
level of the setting menu. You can also
use this button to turn the power on or
off. (Give it a long press to turn the
power off.)
button
• When the power is turned on using the [END/POWER] key, the [ENTER] key lights up blue and turns off when the
power switch is turned off. While the main power switch ( P.1-4) is on, the ink clogging prevention function is peri-
odically operated even when the power is turned off using the [END/POWER] key.
Ink full
Approximatel
y 1/8
consumed
Approximatel
y 1/4
consumed
Approximatel
y 3/8
consumed
Approximatel
y 1/2
consumed
Approximatel
y 5/8
consumed
Approximatel
y 3/4
consumed
Approximatel
y 7/8
consumed
Near end