5-18
Chapter 5 Maintenance
Replacing consum-
ables
Replacing the wiper
Wiper (part number: SPA - 0271) is consumables.
When the display indicates the warning message
“Replace a WIPER”, it is necessary to check and replace
the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
Press the
(MENU)
and
press the key.
• MAINTENANCE MENU will be displayed.
2
Press to select "STATION", and
press the key.
3
Press to select "WIPER
EXCHANGE", and press the key.
• The number of times the wiper was used will be
reset.
• The carriage moves onto the platen.
4
Remove the wiper.
• Pull out the wiper by holding the protrusions at its
both ends.
5
Insert a new wiper.
• Insert the wiper by holding the protrusions at its
both ends.
6
Press the key.
• After its initial operation, the machine returns to
LOCAL.
Replacing the mist filter
1
Press the
(MENU)
and
press the key.
• MAINTENANCE MENU will be displayed.
2
Press the key twice to select the
“CARRIAGE OUT”.
3
Press to select "HEAD
MAINTENANCE", and press the
key.
• The carriage will move to the left end of this
machine.
4
Open the left maintenance cover.
• The cleaning wiper is sold separately. Buy one
through the dealer in your region or at our service
office.
Maintenance cover
Maintenance cover
To Next Page
Loading...
