MIMAKI UCJV300-75 - Error Messages

Chapter 6 Troubleshooting
6-7
1
2
2
2
2
6
Error messages
When an error message is displayed, eliminate the error according to the chart below.
When displaying again, contact your local distributor or our service desk to call for service.
Message Cause Measures
An error occurred in the head tempera-
ture control.
• Turn off the power to the machine and turn it
on after a while.
When displaying again, contact your local
distributor, our sales office, or service center.
Print head connection error
Print head failure
An error occurred in the main PCB .
An error occurred in the head control.
Detected the battery life end of the main
PCB.
An error occurred in the head control.
An error occurred in the head control.
An error occurred in the log control.
An error occurred in the power supply
system of the main PCB.
An error occurred in the power supply of
the main PCB.
ERROR 108
HD THERMIS [1234]
ERROR 108
HD CONNECT [1234]
ERROR 108
ERROR 108
HD MEM EMP [1234 ]
ERROR 108
HD TYPE [1234]
ERROR 122
CHECK:SDRAM
ERROR 128
HDC FIFO OVER
ERROR 128
HDC FIFO UNDER
ERROR 129
BATTERY EXCHANGE
ERROR 12a
HDC SPEED
ERROR 130
HD DATA SEQ
ERROR 148
E-LOG SEQ
ERROR 151
Main PCB V1R2
ERROR 152
Main PCB V2R5
ERROR 153
Main PCB V3R3
ERROR 154
Main PCB V05
ERROR 155
Main PCB V36-1
ERROR 157
Main PCB VTT
ERROR 158
Main PCB V36-2
ERROR 16e
Main PCB V3R3B