MIMAKI UJF-3042 MkII Series - Mist Filter Cleaning

Chapter 4 Maintenance
4-8
Cleaning the mist filter
1
Press the
(MENU)
in LOCAL mode.
2
Press to select “ MAINTENANCE ”,
and press the key.
• MAINTENANCE MENU will be displayed.
3
Press the key.
• “STATION” will be selected.
4
Press the key.
• “CARRIGE OUT” will be selected and the carriage
will move.
5
Open the left maintenance cover.
6
Remove the mist filter.
• Mist filters are located in two places.
• To remove the mist filter, pull the knob to the front
while pushing the hook in the direction indicated
by the arrow.
7
Clean the filter.
• Remove the filter, and remove the stain by holding
paper towel or the like.
• Wipe off any stain adhering to the filter case.
8
Set the mist filter at the original position.
9
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
Hook
Knob
HookKnob
• If the stain strongly attached to the filter, such as
the liquefaction of the ink attached to the filter,
please replace the filter. ( P.4-21)