MIMAKI UJF-3042 MkII Series - Page 83

Chapter 4 Maintenance
4-7
1
2
2
4
5
6
9
(When using suction wiper) Clean the
suction wiper.
• Wipe off any ink on or around the wiper with a
cleaning swab dipped in maintenance
Maintenance liquid .
Wipe off so that cleaning solution for maintenance will
not remain.
 Clean the tube once a week to prevent wiper
tube clogging.
(1) Fill the dropper with 3 cc cleaning solution.
• Use the dropper scale for the liquid measure.
(2) Fill the suction wiper with the cleaning solution from
its mouth.
• Speed to fill with cleaning solution: 1 cc/second
10
Clean the cap rubber.
• Wipe off the ink sticking to the cap rubber with a
cleaning swab dipped in maintenance solution for
maintenance.
• Wipe off so that maintenance solution for
maintenance will not remain.
11
Press the key after the cleaning.
12
Close the maintenance cover then press
the key.
• After its initial operation, the machine returns to
step1.
Suction wipe
Suction wipe
Area around wiper
Area around wiper
UJF-3042MkII e/3042MkII EX e
/6042MkII e
UJF-3042MkII/3042MkII EX
/6042MkII
dropper
dropper
UJF-3042MkII/3042MkII EX
/6042MkII
UJF-3042MkII e/3042MkII EX e
/6042MkII e
• Wipe off so that no ink or cleaning solution
remains on the rim of the cap rubber.If ink
remains, nozzle missing or mixed color may occur.
Cap rubber