MIMAKI UJF-3042 MkII Series - Basic Operations

This chapter
describes procedures and setting methods for ink and media preparation, and printing.
Operation flow.............................................. 2-2
Turning the Power ON/OFF......................... 2-3
Turning the Power ON ............................... 2-3
Turning the Power OFF.............................. 2-3
Setting the media......................................... 2-4
Set the media in another method ............... 2-6
Test printing ................................................. 2-7
Perform test printing with the test pattern for
checking white ink ...................................... 2-8
Head Cleaning ............................................. 2-8
About head cleaning .................................. 2-8
Perform head cleaning depending on the test
printing result ..............................................2-8
Printing an image from source data .............2-9
Starting the printing operation.....................2-9
Interruption of printing.................................2-9
Checking printing data that is being received or
has been received ....................................2-10
When [! WORK High] is displayed............2-10
If you open the cover during printing ........2-10
Chapter 2
Basic Operations