MIMAKI UJF-3042 MkII Series User Manual

Chapter 1 Before Use
1-19
1
2
2
2
2
Menu mode
This machine has three modes. Each mode is described
below.
 Local
Local is a mode in printing preparation state.
All keys are available.
Receiving of data from the computer is allowed,
however, printing is not executed.
The following operations are allowed in the local.
(1) Setting an origin and the table height by pressing
the JOG keys.
(2) Executing “Test printing” by pressing the
[FUNC2](TEST PRINT/CLEANING) key.
(3) Executing “head cleaning” by pressing the
[FUNC2](TEST PRING/CLEANING) key.
(4) Execute setting of each function by pressing the
[FUNC1](MENU) key.
 Menu Mode
Press the [FUNC1](MENU) key during the Local Mode
to call the Function Mode.
In this mode, you can configure various settings or
carry out the maintenance process.
 Remote
Remote is a mode in printing received data.
Press the [FUNC3](REMOTE) key during printing to
return to the local mode and temporarily stop the
printing process.
Press the [FUNC3](REMOTE) during the Local Mode
to switch to the Remote.

MIMAKI UJF-3042 MkII Series Specifications

General

Maximum Print Size	300 x 420 mm
Power Supply	AC100-240V, 50/60Hz
Print Technology	UV LED
Ink Type	UV curable ink
Interface	USB 2.0, Ethernet
Ink Colors	C, M, Y, K, W, Cl
Media Weight	Up to 5 kg
Resolution	Up to 1200 x 1200 dpi