This chapter
describes the various setting of this machine.
About Head Height MENU ........................... 3-2
Head Height MENU table........................... 3-2
Setting the Media Thickness ...................... 3-3
Setting the HEAD GAP .............................. 3-3
Gap check .................................................. 3-3
Table spacer .............................................. 3-4
About ORIGIN SETUP MENU ..................... 3-5
ORIGIN SETUP MENU table ..................... 3-5
Setting the X offset (REM) ......................... 3-6
Setting the Y offset (REM) ......................... 3-6
Setting the X offset (LOC) .......................... 3-6
Setting the Y offset (LOC) .......................... 3-6
Setting the Z origin ..................................... 3-7
Changing the origin using the JOG keys.... 3-7
About SETUP MENU ................................... 3-8
SETUP MENU table................................... 3-9
Setting of Media Correction...................... 3-10
Setting of LOGICAL SEEK....................... 3-10
Setting of INK LAYERS............................ 3-11
Setting of REFRESH LEVEL.................... 3-11
Setting of UV MODE ................................ 3-11
Setting of WORK CHANGE ..................... 3-11
Setting of FAN MODE .............................. 3-12
Setting of AUTO CLEANING.................... 3-12
Setting of PRINT FLUSHING LEVEL....... 3-12
Setting of MAPS4..................................... 3-13
Setting of the Misregistration adjust ......... 3-14
Setting of LT mode................................... 3-15
Setting of SUCTION WIPER.....................3-15
About MACHINE SETUP MENU................3-16
MACHINE SETUP MENU table................3-17
Setting a AUTO Power-off ........................3-18
Setting Time..............................................3-18
Setting Unit (Length).................................3-18
Setting a KEY BUZZER............................3-18
Setting the network...................................3-19
Setting event mail function........................3-19
Setting of Remote control .........................3-24
Setting a LANGUAGE...............................3-24
Setting a Ionizer (Option)..........................3-24
Recognize connection options..................3-25
Initializing the Settings..............................3-25
Setting the time of the head temperature to
standby .....................................................3-25
About NOZZLE CHECK MENU .................3-26
INFORMATION MENU table ....................3-26
Printing Check Flow..................................3-27
Printing Operations at “Nozzle Missing” Judg-
ment and Error Occurrence ......................3-27
Setting the Printing Check ........................3-28
Setting the NOZZLE RECOVERY ............3-28
Setting the Judgment Condition................3-28
About INFORMATION MENU ....................3-29
INFORMATION MENU table ....................3-29
Displaying the Information ........................3-30
Chapter 3
Setup
To Next Page
Loading...
