MIMAKI UJF-3042MkII - Clean with Electrode Probe Cleaning Kit (SPA-0237); Installing Filter for SPA-0237 Cleaning Kit

3
(2) Capping Station ("Cleaning the Wiper and Cap" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean
the head frequently using the cleaning liquid for maintenance suitable for the ink used to avoid the stains on
the head.
• F-200 / LF-200 Washing Liquid (SPC-0568)
1
Move the carriage and open the right front
cover.
• Refer to the Step 1 to 4 of Chapter 4 “Cleaning around
the wiper” of the user’s manual to perform the operation.
2
Clean the wiper.
3
Clean the cap.
• Dip the UJ Cleaning swab into the cleaning liquid for
maintenance and wipe off the cap.
4
Clean the mist filter 1.(“Cleaning the mist
filter” Chapter 4 of the Operation Manual)
• If the stain is strong, please replace the filter referring to
the Operation Manual Chapter 4 “Replacing the mist
filter”.
Wipe off so that cleaning solution for maintenance will not
remain.
Projection
(1) Remove the wiper.
(3) Set the wiper at the original
position.
(2) Clean the wiper and bracket.
Wiper
Bracket