MIMAKI UJF-6042MkII e - Daily Care; Capping Station Maintenance

- 6 -
 UJF-7151plusII
 Ink sets and supported braille modes
4 Color+SP
*1 : Braille is printed in CMYK + clear mixed colors.
6 Color+SP
*1 : Braille is printed in CMYK + clear mixed colors.
*2 : Braille is printed in CMYK + white mixed colors.
 Print conditions
In RasterLink, device profiles with the following conditions should be installed for each ink set.
4 Color+SP
6 Color+SP
Ink set Special color set Standard mode High-speed mode
LH-100 CMYK CIPWW *1
LUS-120 CMYK CIPWW *1
LUS-350 CMYK - Not supported
Ink set Special color set Standard mode High-speed mode
LH-100 CMYKLcLm WW *2
WCI *1
WP *2
CIP *1
CISi *1
WSi *2
LUS-120 CMYKLcLm WW *2
WCI *1
WP *2
CIP *1
LUS-350 CMYKLcLm - Not supported
• When a job is created, output settings are automatically applied to braille jobs.
Mode Standard mode High-speed mode
Media [Braille] Standard mode [Braille] High-speed mode
Resolution 600 x 900 VD 600 x 900 VD
No. of passes 16 passes 12 passes
Mode Standard mode High-speed mode
Media [Braille] Standard mode [Braille] High-speed mode
Resolution 600 x 900 VD 600 x 900 VD
No. of passes 16 passes 12 passes