MIMAKI UJF-6042MkII e - Periodically Care (for models with PR-200 ink only); Nozzle Wash (PR-200 Ink)

- 7 -
Recommended Media for Each Ink
Using media other than the recommended above may cause issues such as these.
•Media becomes warped and rubs against the heads.
•Ink eventually peels off the media.
Always confirm that no problems are occurring if you use media other than the recommended one.
Substrate LH-100 LUS-120
Polycarbonate OK OK
Polystyrene OK OK
ABS OK OK
PET w/ Adhesive Coating HK31WF OK OK
PET w/ Adhesive Coating U292W
Not available
OK