Printer supplement
Separated file formats, e.g. PS, PDF, EPS, support spot colors. For Fiery XF, the spot color name WHITE_INK has a
special meaning. It is a pre-defined printer-specific internal spot color. During job processing, it goes directly to the
printer, by-passing color management. It is possible to specify it directly in the document. Alternatively, you can use
Color Editor to set up an alias, by mapping one of the job’s separations to WHITE_INK. You can then select the .*cxf
file in the color settings of the job.
You can find the settings for White ink on the Special Printer Settings panel for the printer (Server Manager) or for the
job (Job Editor).
To Next Page
Loading...
