3
(2) Capping Station ("Cleaning the Wiper and Cap" Chapter 4 of the Operation Manual)
The surrounding area of the cap is also liable to be stained by the dust and ink. It is recommended to clean
the head frequently using the cleaning liquid for maintenance suitable for the ink used to avoid the stains on
the head.
• Washing liquid for maintenance (SPC-0568)
1
Move the carriage and open the right side
maintenance cover.
• Refer to the Step 1 to 4 of Chapter 4 “Cleaning the Wiper
and Cap” of the user’s manual to perform the operation.
2
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in cleaning solution for
maintenance.
Wipe off so that cleaning solution for maintenance will not
remain.
To Next Page
Loading...
