9
3
Replace the white ink tank.
• Cover the surrounding area with waste cloth for protection
against dirt before changing the ink tank.
(1) Remove the motor’s connector.
(2) Remove the ink filter attached to the ink tank.
• Loosen the joints on the top and bottom of the ink
filter, and remove the filter.
(3) Remove the joint attached to the side of ink
fillter.
(4) Set a new ink tank, and mount the ink filter.
• Tighten the joints on the top and bottom of the ink
filter.
4
Refer to the Chapter 1 “Fill ink in the ink tank and charging” of the user’s manual to
perform the operation, and refill with new ink.
• Do not tighten the joint too much. Otherwise, the filter might be damaged. Be careful.
• Do not pour the ink remaining in the removed ink tank into the new tank.
• Request that an industrial waste disposal company process the disposal ink.
To Next Page
Loading...
