1
2
3
4
Start the program on the panning Astro first, and immediately start
the program on the tilting Astro.
2
1
TIME-LAPSE GUIDE
EXTENDED USES
11
Tilt
Pan & Tilt
Set up a tilting Astro. For panning, screw a second Astro into a
second L-bracket using the outtermost thread, and attach the
second L-bracket into the tilting Astro with the thumb screw.
Screw Astro into one of the 5 threads on the L-bracket. Use the thread
that properly centers your camera with Astro. Attach the camera to
the L-bracket with the thumb screw, and connect the camera to Astro.
Note: Only the tilting Astro connects to the camera. Both Astros should be
programed with the same total duration and same interval. The rotation
angle can be different.
By using an L-bracket, you can create tilting time-lapses. With two
Astros and two L-brackets you can pan and tilt simultaneously.