Mindeo MD60 Series - 1 Specifications; Technical Specifications

1
1 Specifications
1-1 Technical specifications
Table 1-1 Technical specifications
Dimensions
Height × Width × Depth：76.6 mm × 67.3 mm × 168.5 mm
Weight
116 g, without cable
Cable
Straight 2.0 m
Connector type
RJ-45 phone jack connector
Case material
ABS
Exit window material
PC
Indicator
Beeper, LED
Interface supported
RS-232, USB Keyboard, USB virtual COM
Operating mode
Hand-held, Auto-detection
Programming method
Manual (reading special barcode)
Program upgrade
Online
Input voltage
5 VDC ± 0.25 V
Power
0.40 W (Standby), 1.20 W (Working)
Current
80 mA (Standby), 240 mA (Working)
Image size
640 × 480 pixels
Scanning angle
±60°, ±40°, 360° (Skew, Pitch, Roll)
Decode capability
1D: UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN (Bookland EAN), ISSN,
Code 39, Code 39 full ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5,
Industrial 2 of 5 (Discrete 2 of 5), Matrix 2 of 5, Codabar (NW7), Code 128,
UCC/EAN 128, ISBT 128, Code 93, Code 11 (USD-8), MSI/Plessey,
UK/Plessey, China Post, China Finance, Telepen, GS1 DataBar (formerly RSS)
variants
2D: PDF417, QR Code, DataMatrix
Min. element width
5 mil, 1 mil = 0.0254 mm
Decoding depth
5mil Code39 (20 chars):
1.2cm – 5.5cm
13mil UPC (6 chars):
0.5cm – 15.0cm
20mil Code39 (5 chars):
4.0cm – 24.0cm
5mil QR (40 chars):
2.2cm – 4.5cm
6.7mil PDF417 (20 chars):
1.0cm – 8.5cm
10 mil QR (20 chars):
1.0cm – 11.0cm
10 mil DM (20 chars):
1.0cm – 9.0cm
20 mil QR (20 chars):
1.5cm – 22.0cm
Temperature
-10° to 50°C (14° to 122°F), Operating; -20° to 60°C (-4° to 140°F), Storage
Humidity
5% to 95% (non-condensing)
Safety
EMC: EN55022, EN55024
Electrical safety: EN60950-1
Photobiological safety: EN62471:2008
Illumination: 0~100,000 LUX
Drop resistance: 30 times of 2. 0 m (6.6 ft) drop to concrete
Sealing: IP50