Mindray BA-88A Service Manual

5 Service and Maintenance
5-
8
2
After confirming that the FPGA software or the lower computer software has been copied
to the instrument memory, enter the Maintenance interface.
Click Advanced to pop up the dialog box shown in the following figure. Enter the
password—analyzer and click OK.
And the following screen will be displayed:

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C