5-98 Image Optimization
HQElasto
Enable the high-quality scan mode and optimize the penetrability.
Tap [HQElasto] to enable the function. The soft key becomes highlighted.
Press <Update> to acquire the high-quality image. It produces single-frame B image
and ROI elasto metric data.
The measurement, comment and body mark is not available in HQElasto status.
Filtering
This feature is used to filter the noise of the elasto image.
Rotate the knob under the [Filter] item on the touch screen.
The higher the level is, the smaller the noise of the elasto image becomes, and the
clearer the edge of the field target appears.
The system restarts scanning B image and E image after the filtering parameter is
adjusted.
HFElasto
This feature is used to improve the frame rate (FR).
Tap [HFElasto] on the touch screen to enable the function and the button will be
highlighted.
Lesion
It is used to distinguish elastography data of the different lesion region.
Tap [Lesion] on the touch screen to adjust.
To Next Page
Loading...
Need help?
General
