3-6 System Preparation
3.2.5 Standby
When the battery capacity is charged to the full capacity, the standby time of the system is no less
than 24 hours.
Standby condition: only 5V_STB power are available, and the standby indicator turns orange.
To enter standby:
Open [Setup]→[System Preset]→―General‖ to set the time for screensaver and standby. If
there is no operation to the system, the system enters screensaver after the waiting time set
for screensaver, and if there is still no operation, the system enters standby after the waiting
time for standby.
To exit standby:
Press the power button.
Under the standby status:
Press the power button to exit the standby status and then power off the system.
If you will not use the system for a long period of time, you shall disconnect the power
adapter; disconnect the mains power; turn off powers of all peripherals connected to the
system.
To Next Page
Loading...
Need help?
General
