5-10 Image Optimization
Dual Live
Display different image effects of one probe for a better observation.
Touch [Dual Live] on the touch screen to turn on/off the function, and dual-split
window of images are displayed on the main screen.
Two pages of adjustable parameters are displayed in the touch screen as well;
where, shared parameters and left window parameters are displayed in the B(L)
page, while right window parameters are displayed in the B(R) page.
In the image parameter area on the upper right corner of the main screen,
parameters of the both windows are displayed.
Image magnification is available in dual live mode.
LGC
Adjust gain of scan lines to increase the image lateral resolution.
Touch [LGC] on the touch screen to enter the adjusting dialogue box.
The 8 rods displayed on the touch screen indicate the corresponding image areas
on the main screen.
Touch the to adjust the gain, move downwards to decrease the gain, while
move upwards to increase the gain.
In addition, the system provides several preset parameters for imaging.
Echo Boost
This function can improve contrast and decrease noises, so that a much clearer
boundary can be seen.
Touch [Echo Boost] on the touch screen to turn on the function (when the function is
turned on, the [Echo Boost] button is highlighted in green and the system has ―Echo
Boost‖ status indicating on the image parameter area).
This function is available for using phased probes in cardiac exam mode and using
linear probes.
To Next Page
Loading...
Need help?
General
