Mindray DC-85 User Manual

1-6 Safety Precautions
8.
It is necessary to press <End Exam> to end the current scan that is
in progress and clear the current Patient Information field.
Otherwise, new patient data may be combined with the previous
patient data.
9.
Do not connect or disconnect the system’s power cord or its
accessories (e.g., a printer or a recorder) without turning OFF the
system power first. This may damage the system and its accessories
or cause electric shock.
10.
If the system is powered off improperly during operation, it may
result in data damage of the system hard disk or system failure.
11.
Do not use a USB memory device (e.g., a USB flash drive, a
removable hard disk) which has unsafe data. Otherwise, system
damage may result.
12.
It is recommended to only use the video devices specified in this
manual.
13.
Do not use gel, disinfectant, probes, probe sheath or needle-guided
brackets that are not compatible with the system.
14.
The applied contrast agents should be compliant with the relevant
local regulations.
15.
Read the Acoustic Output Principle in the operation manual carefully
before operating this system on clinical examination.
16.
The cover contains natural rubber that can cause allergic reactions
in some individuals.
17.
Please use the ultrasound gel compliant with the relevant local
regulations.
18.
Normal operation may be affected by unstable mains power supply;
it is recommended that our product be powered from an
uninterruptible power supply.
19.
DO NOT expose the system to excessive vibration through
transportation. Mechanical damage may result.
20.
Always keep the system dry. Avoid transporting this system quickly
from a cold place to a warm place; otherwise condensation or water
droplets may form allowing a short circuit and possible electric
shock.
NOTE:
1. DO NOT use the system in the vicinity of strong electromagnetic field (such as a
transformer), which may affect the performance of the system.
2. Do not use the system in the vicinity of high-frequency radiation source (e.g. cellular
phones), which may affect the performance of the system or even lead to failure.
3. When using or placing the system, keep the system horizontal to avoid imbalance.
4. To avoid damaging the system, do not use it in following environment:
 Locations exposed to direct sunlight;
 Locations subject to sudden changes in environmental temperature;
 Dusty locations;
 Locations subject to vibration;
 Locations near heat generators;
 Locations with high humidity.

Mindray DC-85 Specifications

General

Brand	Mindray
Model	DC-85
Category	Diagnostic Equipment
Language	English