Setup 12-3
12.1.2 General
Open the page via [Setup]-> [System]-> [General].
Info displays in image
banner
To select if to display the available patient information
items on the screen.
To set the unit for patient height and weight.
To set the surface formula.
To set the system state after the image is frozen.
To set the system status when an exam ends.
Sending/printing after End
Exam
Select if to automatically archive the exam data to
DICOM server for storage/print.
To set the brightness and the contrast of the main
screen, or restore to the default.
Brightness auto
adjustment
To set the brightness/contrast of the main screen and
the touch screen according to the conditions.
After selection, the system restores the touch screen
settings back to factory.
To Next Page
Loading...
Need help?
General
