Mindray DC-85 User Manual

B-4 Ultrasound Gel Warmer
B.6 Remove the Warmer
1. Pull out the power cable from the control panel jack.
2. Push the warmer as per the arrow direction.
3. Remove the warmer as shown in the following figure.
B.7 Mount/Remove Probe Holder
To install the gel warmer, you have to remove the probe holder first.
B.7.1 Remove the Holder
Push towards the arrow direction on the bottom and lift upwards to remove the holder.

Mindray DC-85 Specifications

General

Brand	Mindray
Model	DC-85
Category	Diagnostic Equipment
Language	English