Barcode Reader E-7
E.2.2.2 Removing the Interface Cable
1. Using the tip of a screwdriver or some other tools with a sharp head, depress the cable’s modular
connector clip.
2. Carefully slide out the cable.
E.2.3 Setting
The reader has factory settings; please refer to A.4 for details.
The reader supports some user-defined functions as introduced below.
For more details, please contact the SYMBOL reader agents or Mindray Customer Service Department.
Volume setting:
Scan the following barcode to set the volume parameter.
To Next Page
Loading...
Need help?
General
